David fiber device Ltd
Add to Cart
C+L band optical circulator, 3 ports, 1.0dB insertion loss, 30dB isolation.
The C+L band fiber circulator can be used to protect the signal source with high isolation.
From this point, you can treat it as an isolator but it doesn't equal to the isolator. Taking the number of the ports as an example, the isolator has one input and one output but the 3ports circulator has 2 input and 2 output. For this reason, the port 2 of the 3 ports circulator is the input and output, it means that you can input your signal from port 2 and you can also transmit the optical signal from port 2.When we talk the light path of the circulator, it like this, check the below info for more details about the working path.
Firstly, the signal inserts from port 1 and output port 3.
Secondly, the other signal will input port 2 and output port 3
We need to pay more attention to the port 3 because it can not be treated as an entry.
Features
Structure : 3 ports
Insertion loss : ≤ 1.0dB
High return loss: return loss ≥50dB
High isolation: isolation ≥30dB
Compact size: 5.5x50mm package size
Applications
Protecting the light source
Optical amplifier
Optical transmission system
Data center
| Specifications | ||
| Parameters | Unit | Specification |
| Operating wavelength Range | nm | 1520~1620 |
| Insertion loss (1-2, 2-3 @ 23 C ) | dB | ≤1.0 |
| Polarization Dependent Loss (PDL) | dB | ≤0.10 |
| Polarization Mode Dispersion (PMD) | dB | ≤0.1 |
| Isolation (2-1, 3-2 @ 23 C) | dB | ≥30 |
| Directivity | dB | ≥50 |
| Return Loss | dB | ≥50 |
| Power handling(mW) | mW | ≤500 |
| Pigtail length | m | 1m or special |
| Port color | - | 1m or special |
| Tensile Load | N | ≤5 |
| Operating Temperature | C | -5 to +70 |
| Storage Temperature | C | -40 to +85 |
| Remark | ||
| * Above specifications are tested without connector at room temperature With connector, 0.3dB higher for IL & 5dB lower for RL per connector. | ||
